Huawei Y6 Prime 2019

Опубликовано: 30 Ноябрь 2020
на канале: CELL CARE SMC-Private Limited (FRPIMEI)

330

How to Bypass FRP/Google Lock from Huawei Y6 Prime 2019 MRD-LXF1 model:

1. Dissamble phone (take out SIM tray, remove back cover, disconnect finger print flex)
2. Disconnect BATTERY !!!
3. Open SP_Flash_Tool_v5.1824_Win and select DA, Scatter and AUTH file as shown in video tutorial

4. Go to Format Options and Select Manual Format, input Begin Address and Format length - check Y6_2019_FRP_WIPE.txt
Begin Address[HEX]: 0x108000
Format Length[HEX]: 0x100000
5. Connect Test Point and USB cable to phone (DO NOT connect cable on PC/Laptop for now)

6. Click Start on Format Options and Connect USB cable on PC/Laptop - MediaTek USB Port will appear now and FRP partition will be wiped

If you see MediaTek Preloader Port instead, this means Test Point is wrong or it timed-out - TRY AGAIN.
DO NOT FORMAT any other Partition or DO NOT ATTEMPT to Upgrade/Download firmware if your phone has ONLY FRP/Google Locked.
This FRP/Google Lock Bypass procedure is RISK FREE (if you follow it properly). However, I WILL NOT be held responsible for any brick.

DO THIS ON YOUR OWN RISK, OF COURSE !

Download Link
https://drive.google.com/file/d/11Ebs...

Смотрите видео Huawei Y6 Prime 2019 онлайн, длительностью часов минут секунд в хорошем качестве, которое загружено на канал CELL CARE SMC-Private Limited (FRPIMEI) 30 Ноябрь 2020. Делитесь ссылкой на видео в социальных сетях, чтобы ваши подписчики и друзья так же посмотрели это видео. Данный видеоклип посмотрели 330 раз и оно понравилось 1 посетителям.