Taking apart ASUS GTX1070turbo and replacing fan bearings

Published: 21 March 2021
on channel: ajs32tricopter

887

This video shows how to take apart the ASUS GTX1070 turbo GPU and change bearings on the fan. GTX1070turbo is used as an example, but these instructions should work for any ASUS turbo GPU.

01:35 Removal of the fan
03:45 Disassemble of the fan

Video with detailed instructions for disassemble/assemble of the GPU: • ASUS GTX 1070 turbo disassemble

To compare the result: temperatures before were 58-60C mining at around 26MH at ETH, after change of BB and applying Noctua NT-H1 thermal paste, temps are at 51-54C
Bearings: 693ZZ, 3x8x4mm (inner x outer x width)
Circlip pliers for 3-10mm circlips. Can take 1 size bigger pliers and sand the tips to fit smaller sizes (tip diameter needed is 0.9mm)

Watch video Taking apart ASUS GTX1070turbo and replacing fan bearings online, duration hours minute second in high quality that is uploaded to the channel ajs32tricopter 21 March 2021. Share the link to the video on social media so that your subscribers and friends will also watch this video. This video clip has been viewed 887 times and liked it 25 visitors.

2,014

00:00:00